• EVO Nelly Turbo

 

  • Extra high efficiency h-bridge
  • Outperforms an 8x2 stack of EVO stock MOSFETS.
  • Outperforms a 5x2 stack of EVO upgraded MOSFETS
  • Smallest external turbo available
  • Ultraflex 26AWG Silicon wire
  • $34.00 USD

 

 

 

 
  • STACKED EVO Nelly Turbo

 

  • Extra high efficiency h-bridge
  • High Power design
  • Outperforms an 16x2 stack of EVO stock MOSFETS.
  • Outperforms a 10x2 stack of EVO upgraded MOSFETS
  • For high current applications (10+ turn motors)
  • Ultraflex 22AWG Silicon wire
  • $47.00 USD

 

 

 

 
  • EVO Nelly Turbo (Kit Version)

 

  • Extra high efficiency h-bridge
  • Outperforms an 8x2 stack of EVO stock MOSFETS.
  • Outperforms a 5x2 stack of EVO upgraded MOSFETS
  • Smallest external turbo available
  • Ultraflex 26AWG Silicon wire
  • This version comes partially assembled (shown on the left, click on picture for a larger view).  
  • $25.00 USD

 

 

 

 
  • Plasmatomic Motor

 

  • The original 45mph motor.
  • 27 turns, using 0.35mm low resistance wire
  • Oversized, high temperature, ceramic commutator
  • Neomidium Magnets (This is the high torque model)
  • High grade carbon brushes
  • ATOMIC Ball Bearing case
  • Open air endbell, allowing better contact to the large commutator and increased cooling
  • Carefully built and tuned to ensure greatest performance
  • Already broken in my me, these motors are ready to run!
  • See stats page for MOSFET/Turbo requirements.
  • $42.00USD

 

 

 

 
  • Nelly Deluxe Turbo

 

  • Representing the best Power Management & External Turbo money can buy for 1:28 scale racing.
  • Min voltage: 7.2V - (6 cell nimh/nicd or 2 cell li-ion)
  • Max voltage: 12V - (10 cell nimh/nicd, 3 cell li-ion (10.8V), 3 cell li-poly (11.1V))
  • Max current: 16A (100A theoretical peak)
  • Total resistance: 0.0087 Ohms (lowest in the game)
  • Accepts all "hot" 130 sized motors
  • Keeps the brake function
  • Runs exceptionally cool, even with low wind (<30 turn) motors running high current setups (eg: HP Li-poly)
  • Dimensions: 32mm Wide x 25mm Long x 5mm High
  • More info on Nelly Deluxe can be found here.
  • $70.00 USD

 

 

 

 
  • XMOD Evolutions Li-Poly Battery Pack
  • 7.4V, 700mAh, 7A Discharge

 

  • Voltage: 7.4V
  • Capacity: 700mAh
  • Discharge: 7A (10C)
  • Connectors: Deans Micro
  • Wire: Ultraflex 28AWG Silicon Wire
  • Insulation: 1.5mm Clear Heatshrink
  • They are connected up with Deans micro plugs, ready to go. The polarity is set to the "standard" of many other lithium solutions made by other vendors to allow you to easily use this with other lithium chargers.
  • These packs have had the individual cells balanced and pre-charged, ready to go.
  • Click on the picture to see the full kit.
  • $40.00 USD